09/13/07

Valve Mod

Once again this page is not mine as you can see I got it from D-Day's Super Charger Heaven Site at HTTP://www.go.to/slidecheck/

It requires:

1. Take the valve at the 3o'clock position and drill it out with a 3/16" drill bit.
    BE CAREFUL NOT TO DRILL INTO THE OTHER VALVE SETTING BELOW... THIS MEANS YOU!!!

2. Take the valve, SAND the newly modified valve setting to remove burs... Take it then and scrub it up in some
    warm soapy water with a brush to get all the dirt and metal shavings out...