Tactical Assault Rifle 

Ok here is my newest Vm. This one need a lot of help. It was a rental gun but the back main screw was snipped so you couldn't break the gun down to clean it. So when I got it there was so much grease with sand and god know what else that if cocked and you pulled the trigger the hammer barely moved half way to the valve. But hear is the funny thing with out cleaning the gun and only adding oil around the hammer then bang the gun was working again even with all the shite that was in there .Man lets see a spider do that. 

So anyway that dam screw just would not come out then as I was trying drill it out my drill bit broke and now the drill bit tip was in there well only one thing left to do. CUT. So I took out the hacksaw and cut 1/2" off the back. Well now that I was inside the gun I cleaned up all the gunk and replaced the cupseal and started modifying the gun to makeup for the 1/2" I cut off so I trimmed the main spring a little and took off the hammer bumper drilled and tapped the plug holes with this done I put it together screwed on a tank and tested worked like a dream.

So on to making it look and feel good.

First thing I needed to do was to fix above the grip .So as you can see I cut the metal at around a 45dg the filed and sand it down so it feels great. Next....

I added the site rail and a Pro-Teams trigger guard now we move on to the stock

Well I was looking around the Net and saw one that looked like this. 

I liked the look so made it.

So to finished up this gun I have added this front grip with..

a flashlight ( I hope this makes you feel good Jinxed) and to top it all off